Product Overview
Wire mesh panels are rigid grid structures produced by resistance-welding or weaving longitudinal and transverse wires at intersections. Designed for structural concrete reinforcement, pallet racking safety, and industrial partitioning, these panels provide uniform load distribution and dimensional stability. Supplied in flat sheets, they integrate directly into concrete forms, racking frames, and security enclosures without secondary field fabrication.
-
Hexagonal Chicken Wire Mesh• The hexagonal chicken wire mesh provides lightweight poultry barriers.• Its open weave allows ventilation.
-
Galvanized Steel Hexagonal Wire Mesh• The galvanized steel hexagonal wire mesh combines steel wire with zinc protection.• Rolls fit farm and garden boundaries.
-
Stainless Steel Hexagonal Wire Mesh• The stainless steel hexagonal wire mesh uses twisted wire in flexible rolls.• Stainless material suits damp enclosures.
-
Welded Gabion Erosion Control UnitsWelded Gabion Erosion Control Units are stone-filled structures assembled from welded steel wire mesh panels. Base, side, end and diaphragm panels create defined compartments for controlled stone
-
Welded Gabion Slope Protection UnitsWelded Gabion Slope Protection Units are stone-filled structures assembled from welded steel wire mesh panels. Base, side, end and diaphragm panels form separate compartments for controlled stone
-
Welded Landscape Gabion BoxesWelded Landscape Gabion Boxes are stone-filled units assembled from welded steel wire mesh panels. The panels form the base, side walls, end panels and internal divisions of each unit. They are used
-
Welded Gabion Retaining WallsWelded Gabion Retaining Walls are modular stone-filled structures made from welded steel wire mesh panels. Panels form the front, rear, base and side sections, with internal diaphragms dividing each
-
Welded Gabion BasketsWelded Gabion Baskets are stone-filled units assembled from welded steel wire mesh panels. The panels form the base, sides, ends, and internal diaphragms, creating defined compartments for stone
-
Welded Gabion BoxesWelded Gabion Boxes are rigid stone-filled wire containers manufactured from welded steel mesh panels. The panels form the base, side walls, end panels, and internal diaphragms required to create
-
Step-Down Wire DeckingStep-Down Wire Decking is a welded steel mesh panel installed across pallet rack beams to form a load-supporting storage surface. Its formed support channels sit below the mesh and engage with
-
Flared Wire DeckingFlared Wire Decking is a welded steel mesh panel installed across pallet rack beams to create a load-supporting storage surface. The flared support channels extend beyond the panel ends, allowing the
-
Drop-In Wire DeckingDrop-In Wire Decking is a welded steel mesh panel installed between pallet rack beams to form an open storage surface. The panel combines welded wire mesh with formed support channels that transfer
Technical Specifications
|
Technical Parameter |
Specification Range / Standard Options |
|
Material Grades |
Carbon Steel (Q195, Q235, SAE 1008), Stainless Steel (AISI 304, AISI 316), Pre-Galvanized Wire |
|
Wire Diameter (Gauge) |
3.0mm to 8.0mm (plus/minus 0.05mm tolerance) |
|
Mesh Aperture (Pitch) |
50x50mm, 100x100mm, 50x100mm, 200x200mm (Custom spacing available) |
|
Panel Dimensions |
Width: Up to 2500mm; Length: Up to 6000mm |
|
Surface Finishes |
Hot-Dip Galvanized (coating weight >= 40g/m2), Electro-Galvanized, Polyester Powder Coated (RAL colors), Mill Finish |
|
Welding Shear Strength |
>= 70 percent of the nominal tensile strength of the wire (Tested per ISO 15630-2) |
|
Applicable Standards |
ASTM A1064, BS 4483, AS/NZS 4671 |
Key Features
High Weld Integrity:
Automated multi-electrode CNC welding machines apply synchronized electrical current and pressure, ensuring shear strength at every intersection prevents joint separation under dynamic loads.
Dimensional Accuracy:
Servo-controlled straightening and trimming systems maintain diagonal squareness tolerance within plus/minus 2.0mm across standard panel configurations.
Corrosion Resistance Options:
Hot-dip galvanizing after welding coats all joint intersections, sealing vulnerable heat-affected zones against moisture penetration.
High Strength-to-Weight Ratio:
Cold-drawn steel wire delivers high yield strength (> 500 MPa for high-tensile variants), reducing overall dead load in structural applications.

Pallet Racking Systems: Installed as wire decking or back-stop safety screens to prevent stored goods from falling through upright frames.
Concrete Reinforcement: Utilized in industrial flooring, precast wall elements, and paving slabs to control shrinkage cracking.
Industrial Enclosures & Machine Guards: Applied in safety fencing, robotic cell perimeters, and HVAC security cages requiring high impact resistance and visual transparency.
Agricultural & Animal Housing: Fabricated into livestock pens, partition panels, and heavy-duty animal caging.
Customization Options
Cutouts & Notches:
Laser cutting or manual trimming for notches, notch-outs, and circular cutouts to accommodate pipes, columns, or hardware.
Edge Configurations:
Available with flush cut edges, overhangs (protruding wires), or folded/bent edges for direct frame insertion.
Custom Wire Diameters:
Combination configurations (e.g., thicker perimeter border wires with thinner internal grid wires) to optimize weight and structural stiffness.
Special Coatings:
Marine-grade epoxy primers and anti-microbial powder coatings for specialized chemical or food-processing environments.
Manufacturing Capabilities
Raw Material Processing: In-house wire drawing lines convert raw wire rods into precise gauges with controlled tensile strengths.
Automated Resistance Welding: CNC multi-axis mesh welding lines handle continuous sheet feeding, capable of outputting up to 80 strokes per minute with automated pitch adjustment.
Shearing & Bending: Hydraulic guillotine shears and CNC press brakes up to 300 tons form custom bends, flanges, and profiles according to CAD/STEP drawings.
Surface Treatment Lines: Fully automated pickling, phosphating, hot-dip galvanizing baths, and electrostatic powder coating booths ensure uniform film thickness and adhesion.
Tensile & Shear Testing: Universal testing machines verify wire tensile strength, elongation, and weld shear resistance for every production lot.
Galvanized Coating Measurement: Magnetic and eddy-current thickness gauges measure zinc coating mass per unit area in compliance with ASTM A123 / ISO 1461.
Dimensional Inspection: Digital calipers, laser distance meters, and go/no-go gauges check wire spacing, diagonal squareness, and overall length/width.
Traceability: Heat numbers and lot tracking codes are stamped on bundle tags, backed by Material Test Reports (MTR) provided upon shipment.

Packaging & Shipping
Palletization:
Panels are stacked flat on heavy-duty fumigated wooden pallets or steel skids, secured with high-tensile steel strapping and protective edge protectors.
Bundle Protection:
Interleaved with moisture-resistant paper or plastic film for powder-coated variants to prevent surface scratching during transit.
Container Loading:
Optimized for 20ft and 40ft dry containers (GP/HC), accommodating forklift loading from the side or rear. Detailed packing lists and weight distribution diagrams provided for customs clearance.
Related Products
Welded Wire Rolls:
Flexible configurations for fencing and general utility.
Expanded Metal Mesh:
Diamond-pattern security panels formed without welds.
Perforated Metal Sheets:
Sheet metal with punched holes for architectural screening and filtration.
Rebar Welded Fabric:
Heavy-duty structural reinforcement mats for foundations and civil engineering.
Frequently Asked Questions
Q: What is the minimum order quantity (MOQ) for custom-sized wire mesh panels?
A: The standard MOQ is 100 pieces per specification for custom dimensions or wire diameters. For standard stock sizes (e.g., 100x100mm pitch, 4x2m sheet), trial orders starting from 20 pieces can be accommodated depending on production schedules.
Q: How do you prevent rust at the weld points on hot-dip galvanized panels?
A: Panels are welded using low-carbon steel wire before entering the hot-dip galvanizing bath. This sequential process ensures that molten zinc completely covers the heat-affected weld zones, sealing exposed metal and preventing galvanic corrosion.
Q: Can these panels be supplied with cutouts for columns or pipe penetrations?
A: Yes. We accept CAD (.dwg/.dxf) or PDF drawings to execute custom cutouts, notches, or perimeter frames prior to surface treatment.
Q: What documentation is supplied with each shipment?
A: Every shipment includes a Commercial Invoice, Packing List, Bill of Lading, Certificate of Origin (Form E/CO if required), and mill test reports (MTR) verifying material composition and mechanical test results.
Q: What is the typical lead time for production and delivery?
A: Standard stock panels ship within 7 to 10 business days. Custom production orders typically require 20 to 30 days, depending on order volume, surface treatment requirements, and current factory capacity.
Q: Do your wire mesh panels comply with international building and safety codes?
A: Yes. Our manufacturing processes comply with ASTM A1064, BS 4483, and ISO 9001 quality management systems. Third-party inspection reports (SGS, BV) can be arranged prior to dispatch upon request.

Request a Quote
To receive a precise quotation within 24 hours, please provide the following technical details via our inquiry form or direct email:
Material & Grade: (e.g., Q235 carbon steel, AISI 304 stainless steel)
Wire Diameter: (mm)
Mesh Aperture / Pitch: (Distance center-to-center of wires, mm)
Panel Dimensions: (Width x Length, mm)
Surface Finish: (Hot-dip galvanized, powder coated, mill finish)
Order Quantity & Destination Port: (Number of pieces/pallets and target port code)
As one of the most professional wire mesh panel manufacturers and suppliers in China, we also support customized service and OEM service. Please feel free to buy high quality wire mesh panel for sale here from our factory. For price consultation, contact us.
8mm steel reinforcing mesh, Chicken Cage Mesh, 1 2 pvc coated welded wire mesh