V-Bend Perimeter Fence

V-Bend Perimeter Fence is a welded steel mesh panel with horizontal V-shaped bends formed across the panel. The welded grid maintains fixed mesh openings, while the formed profile adds section depth and improves panel rigidity.

It is used for industrial, logistics, infrastructure, commercial and controlled-access perimeter fencing. Panel height, width, wire diameter, mesh opening, V-bend configuration, post section and surface treatment can be specified to suit the fence layout and installation method.

Welded Mesh Grid
Horizontal and vertical wires are welded at each intersection to maintain the specified opening and panel geometry.
V-Bend Formation
Horizontal V-bends are formed at controlled positions after mesh welding. Bend depth and quantity are matched to panel height and configuration.
Panel Edge
The panel edge is prepared for the selected clamp or bolted fixing system and corresponding post section.

Low-Carbon Steel Wire
Low-carbon steel wire provides the base material for welded panel production and forming.
Pre-Galvanized Wire
Pre-galvanized wire can be used where zinc-coated wire is specified before welding and forming.
Galvanized Panel
Hot-dip galvanizing after fabrication can be specified where the completed panel requires a galvanized surface.

Section Depth
The formed V-profile increases the depth of the panel section and contributes to rigidity along the fence line.
Wire Selection
Wire diameter affects panel weight and stiffness. The selected wire size should correspond with panel height, mesh opening and post arrangement.
Bend Configuration
Bend depth and quantity are matched to the panel dimensions to maintain a consistent formed profile across the panel.

Pre-Galvanized
Zinc-coated wire is used before welding and forming, providing a galvanized surface throughout the panel construction.
Hot-Dip Galvanized
The fabricated panel can be hot-dip galvanized after welding and forming when a galvanized finished surface is specified.
Powder Coated
A powder-coated finish can be applied where a defined color and additional surface layer are required. RAL color references can be specified with the order.
 

Industrial Perimeters
Suitable for factories, production compounds, workshops and controlled industrial areas.
Logistics Sites
Commonly used around warehouses, distribution yards, loading areas and managed vehicle zones.
Infrastructure
Applicable to utility facilities, transport-related sites and other perimeter projects requiring welded mesh panels.
Commercial Properties
Suitable for commercial compounds where a rigid mesh panel and open perimeter layout are required.

Post Spacing
Post centers are matched to panel width to keep joints aligned and maintain a consistent fence line.
Fixing Method
Clamps or bolted fittings are selected according to the post section, panel edge and installation arrangement.
Foundation
Embedded posts or base-plate mounting can be specified according to the ground structure and project installation method.
 

Wire Diameter
Wire diameter is checked against the specified production size before welding.
Mesh Opening
Opening dimensions are measured to verify the required grid pattern across the finished panel.
Welded Joints
Weld intersections are inspected for consistent joining and visible production defects.
V-Bend Geometry
Bend position, depth and panel width are checked after forming to maintain dimensional consistency.
Surface Finish
The finished surface is inspected for coating coverage, visible defects and conformity with the specified treatment.

Panel Dimensions
Height and width can be specified according to fence layout, post spacing and installation requirements.
Mesh Configuration
Wire diameter, mesh opening, V-bend depth and bend quantity can be selected as a combined panel specification.
Post System
Post section, wall thickness, length and fixing arrangement can be coordinated with the panel dimensions.

Surface Finish
Pre-galvanized, hot-dip galvanized and powder-coated finishes can be specified according to the required surface treatment.

Panel Bundles
Panels are stacked and secured in bundles for handling and transport. Bundle dimensions can be arranged according to the order configuration.
Posts and Fittings
Posts, clamps and fittings can be packed separately and identified according to the installation arrangement.
Loading
Packing quantities and bundle dimensions can be planned around container loading, handling equipment and shipment requirements.